welcome to visit guangzhou feiyue new material limited company's official website!
Email:66571315@qq.com
NEWS
News
Related News
Mixing rubber manufacturer: What rubber-plastic alloy rubber composite materials, how should we carry out rubber compounding?
Release time:
2025-01-23 16:15
WhatRubber-plastic alloy rubberComposite materials, how should we carry out rubber compounding?
Civilian alloy rubber, as a type of compounded rubber, has been promoted in our country due to the trends of social and economic development in recent years.Compounding rubber manufacturersThe technological progress and development of compounded rubber have made silicone compounded rubber one of the key raw materials in the production management of silicone rubber products. It has become an essential material in the current intelligent manufacturing industry, which cannot lack a certain living environment information protection collagen fiber product. Silicone compounded rubber materials only belong to the semi-finished product processing of the product. The quality control of silicone compounded rubber and the quality of rubber compounding greatly determine the market quality of silicone products themselves. Therefore, today I will help everyone understand the professional knowledge of silicone compounded rubber!
Production process of rubber-plastic alloy rubber:
1. Adjusting the roller gap: The main process of rubber compounding is to adjust the roller gap of the rubber machine to a high distance in the middle. Because the solid rubber raw material just added belongs to small pieces, the thickness is relatively high, it is necessary to increase the roller gap to above 10 mm to ensure that silicone can be dispersed as a material. Initially, through silicone compounded rubber to plastic pellets, after reaching a certain temperature, when the material resources are dispersed, the roller gap is gradually adjusted smaller, and after the materials are completely and evenly combined with the curing agent and color rubber, it can be adjusted to the roller gap for output.
2. Raw material turning: The process of raw material turning is a key process. During production, a roll of raw material must be continuously mixed with silicone for about 20 to 30 minutes to ensure that the raw material is fully weighed.
3. Adding color rubber and curing agent: Under the condition of uniform raw material silicone ratio, add color rubber and curing agent according to the proportion of the net weight of the raw material. Otherwise, the raw material is prone to color deviation, and the curing rubber may not be familiar. Both can be added simultaneously, but the curing must be controlled. The quick conversion of the curing agent allows for rapid mixing without generating static electricity, which could cause a fire. In addition, many compounding rubber manufacturers add some quantum technology or other chemicals to silicone products, as well as different powders, water, and pastes.
Rubber-plastic alloy rubber, mixing rubber manufacturer
Related News
Sweep, pay attention to the latest developments
Guangzhou Feiyue New Material Co., Ltd
national free advice hotline:
Address: No. 3, Industrial Road, Sanjiang Tianqiao Industrial Park, Shitan Town, Zengcheng District, Guangzhou
Fax: 020-32163051
Website: www.fyrubber.com.cn
Message consultation
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.
COPYRIGHT©2025 Guangzhou Feiyue New Material Co.，Ltd. ALL RIGHTS RESERVED. | Powerby：300.cn | SEO Tags | Business License | city substation
