Trade News_Guangzhou Feiyue New Material_Industrial roller mixingrubber

welcome to visit guangzhou feiyue new material limited company's official website!

Email:66571315@qq.com

Chinese | English

Fly Canton

Home page

NEWS

News

Home page

Key points for using rubber rollers, the film-coated rubber roller manufacturer will clarify for you.

2022-06-09

The manufacturer of coated rubber rollers believes that the internal structure of newly cast rubber rollers is not stable enough. If put into use immediately, it is likely to reduce the service life. Therefore, newly cast rubber rollers should be left for a period of time to allow them to come into contact with the external environment and reach a relatively stable state before being put into use, which can increase the toughness and durability of the rubber.

Key points for selecting and maintaining rubber rollers, the film-coated rubber roller manufacturer will explain for you.

2022-05-25

The manufacturer of the coating roller believes that the roller, as an important stretching component, is closely related to the quality of the yarn in terms of its performance and management level. Manufacturers not only need to pay attention to the manufacturing process and grinding precision, but also the subsequent use, management, and maintenance of the roller are very important to ensure the excellent and stable spinning performance of the roller. Only by complementing each other can a stable level of spinning quality be achieved.

Some knowledge points about rubber rollers, the film-coated rubber roller manufacturer tells you

2022-05-10

The manufacturer of coated rollers believes that with the development of electronic technology and the popularization of rigid rotor balance theory, since the 1950s, most balance equipment for rubber rollers has adopted electronic measurement technology. Rubber rollers using planar circuit technology effectively eliminate the mutual influence of the balance workpiece on both sides.

Environmental protection mixing rubber Applications

2022-02-24

Eco-friendly blended rubber is quite common in Xinxiang City. The growth of cracks is related to ozone concentration and the mobility of rubber molecular chains. When the ozone concentration is constant, the greater the mobility of the molecular chains, the faster the crack growth. It is believed that the generation and growth of ozone cracking are related to the differences in the physical properties of the thin layer of ozone compounds formed by eco-friendly blended rubber and the physical properties of the surface layer of the original rubber. Now, let's learn about the Applications of eco-friendly blended rubber!

What is environmentally friendly blended rubber

2022-02-12

As far as I know, the environmentally friendly mixing rubber is usually a monomer rubber, made from a mixture of crosslinking agents, catalysts, inhibitors, and pastes. The mixing rubber is generally formed by high-temperature vulcanization after extrusion, and like liquid rubber, it is mainly divided into three types: room temperature vulcanization, low-temperature vulcanization, and high-temperature vulcanization. Regarding the addition of the word "environmental protection" before environmentally friendly mixing rubber, I think it is unnecessary. Because silicone rubber is very environmentally friendly, let's learn together what environmentally friendly mixing rubber is!

What are the reliable manufacturers of coating adhesive rollers?

2022-01-16

The film-coated glue roller is also a product that is currently used quite frequently. Due to its characteristics, it has gained favor among users. There are many manufacturers of film-coated glue rollers on the market, which makes it difficult for users to know how to choose. People often inquire online about which reliable companies are available. Next, I will introduce this to everyone.

2020-08

The quality inspection of rubber compound is an important part of consumption.

The Manufacturer of the mixed rubber will take three samples to measure their plasticity values, in order to check whether the rubber material's plasticity meets the required standards and whether it is uniform. The Mooney viscosity can also be measured. If the plasticity of the rubber material is too low or the Mooney viscosity is too high, the processing performance of the rubber material will be poor. Conversely, if the plasticity is too high or the Mooney viscosity is too low, the rubber material has been over-mixed, which can damage the physical and mechanical properties of the vulcanized rubber. If the plasticity or Mooney viscosity of the rubber material is uneven, it indicates that the quality of the mixed rubber is inconsistent.

2020-08-04

The quality inspection of rubber compound is an important part of consumption.

2020-08

Applications of mixed rubber

The mixed rubber refers to the unvulcanized state of the compound mixed into block, granular, and powdered raw rubber, which has a fluidity. It is mainly used for automotive parts, front and rear spindle oil seals, front and rear crankshaft oil seals, power steering pump seals, transmission pump seals, dust covers, power steering hoses, and 175-degree radiator hoses.

2020-08-01

2020-07

The effect of roller temperature on the mixing of reclaimed rubber.

Using reclaimed rubber to produce rubber products, the rubber material is soft and sticky during mixing. What is the reason for this? In fact, the quality of the reclaimed rubber material during mixing is related to the roller temperature of the rubber mixing machine. Properly controlling the roller temperature is very important for improving the quality of reclaimed rubber products and increasing the yield.

2020-07-29

The effect of roller temperature on the mixing of reclaimed rubber.

2020-07

Introduction to rubber-plastic alloy rubber

Granular rubber-plastic alloy (NBR/PVC) is made from raw materials that meet EU standards and is processed through special techniques. It has excellent wear resistance, aging resistance, anti-slip properties, and puncture resistance, making it particularly suitable for use in footwear products. Using this type of rubber-plastic alloy can effectively reduce formulation development costs and production costs, and it also has excellent processing performance.

2020-07-26

Introduction to rubber-plastic alloy rubber

2020-07

What problems are likely to occur during the production process of mixed rubber and the importance of parking work.

In the process of producing mixed rubber, to prevent sticking, light calcium powder is spread over the surface, or it is immersed in water with loose light calcium powder for cooling. After being taken out, the material is dried, and the light calcium powder adheres to the surface to prevent mutual sticking. The cooled material must be parked to mature. So why go through such trouble during the production process?

2020-07-23

What problems are likely to occur during the production process of mixed rubber and the importance of parking work.

2020-07

Can the mixed rubber be reused, and what problems arise during the refining process?

The compounded rubber is the raw material for manufacturing rubber products, that is, a semi-finished product. Therefore, the dispersion quality of the compounded rubber directly relates to the quality of the finished product. At the same time, the viscoelasticity and rheology of the compounded rubber directly affect the processing performance of the rubber material and the subsequent production processes such as molding, extrusion, calendering, and pressing.

2020-07-20

Can the mixed rubber be reused, and what problems arise during the refining process?

< 1 2 3 4 5 6 7 >

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

required

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

analyze

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

Feature

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

advertise

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.