Company News_Guangzhou Feiyue New Material_Industrial roller mixingrubber

welcome to visit guangzhou feiyue new material limited company's official website!

Email:66571315@qq.com

Chinese | English

Fly Canton

Home page

NEWS

News

Home page

Supplier of compounded rubber: Factors affecting the compounding process

2022-07-08

During the mixing process, the mixing temperature of natural rubber is generally controlled around 130℃, and the discharge temperature is usually controlled within the range of 130~145℃. If the temperature is too low, it often causes the rubber material to not clump under pressure; if the temperature is too high, it will soften the rubber, which is not conducive to the dispersion of filler quality. Therefore, the rubber mixing suppliers need to pay attention to the control and adjustment of cooling water or heating steam according to the process requirements, in order to control the temperature of the mixing chamber.

Supplier of compounded rubber: A brief introduction to compounded rubber

2022-06-23

The mixing rubber supplied by the supplier is a well-known high-performance rubber, especially known for its excellent resistance to high temperatures, ozone, weather, oxidation, mineral oils, fuel oils, hydraulic oils, aromatics, and many organic solvents and chemicals. The FKM system from the mixing rubber supplier is now available in blends such as normal (66% F), medium F (67-68.5% F), high F (70% F), improved low-temperature elasticity (64.5-67% F), and excellent additional chemical and solvent resistance (66% F).

Some knowledge points about polyurethane blended rubber, explained by the blended rubber manufacturer.

2022-04-25

Polyurethane blended rubber is a type of mixed polyurethane rubber (referred to as MPU) synthesized from polyether polyols and methylene diphenyl diisocyanate (MDI) with an unsaturated structure. The vulcanization system can choose between peroxides or sulfur. The processing technology and vulcanization molding processes and equipment are the same as those for general rubber; it is suitable for manufacturing rubber products with hardness ranging from Shore A 50 to 95.

The process and characteristics of compound rubber, as told by the compound rubber manufacturer.

2022-04-11

The manufacturer of mixing rubber believes that mixing is the process of using the mechanical force of a rubber internal mixer to evenly disperse various compounding agents in the rubber. The mixing process is to evenly disperse various compounding agents in the rubber, forming a medium of rubber or a mixture of rubber with some compatible components (compounding agents and other polymers) as the medium, and a multiphase colloidal dispersion system with incompatible compounding agents (such as powder fillers, zinc oxide, pigments, etc.) as the dispersed phase.

A one-minute explanation by the rubber compound supplier about what rubber compound is.

2022-04-02

The so-called compounded rubber refers to a type of unvulcanized rubber that has fluidity, in which the compounding agents are mixed in block, granule, or powder form. According to compounded rubber suppliers, the rubber material that is mixed with the compounding agents according to the formula using a rubber mixing machine is called compounded rubber. Compounded rubber suppliers indicate that compounded rubber is mainly used for automotive parts, front and rear main shaft oil seals, front and rear crankshaft oil seals, power steering pump seals, transmission pump seals, dust covers, power steering hoses, and 175-degree radiator hoses.

The UV adhesive manufacturer will introduce the curing time of UV glue and the reasons for whitening.

2022-03-24

The UV adhesive manufacturer will introduce the curing time of UV glue and the reasons for whitening. Users should pay attention to taking protective measures to avoid discomfort and allergies caused by operators talking on the phone for long periods. It is recommended to maintain good air circulation in the workplace where UV glue is handled. If cost is not a concern, UV adhesive manufacturers can focus on the selection of raw materials to produce products with relatively low odor; however, it is very difficult to achieve a completely odorless product.

2020-12

Introduction to the Surface Treatment Process of Coated Roller Rubber

The coating roller, also known as the rubber roller, is a major component of machinery and is also the core part of the machine. Its quality is related to the overall quality of the machine. The coating roller rubber is a type of rubber roller, mainly used for laminating and bonding in various industries. On coating machinery, the core is covered with a layer of rubber, which is vulcanized at high temperatures, and then processed into finished coating roller rubber through precision grinding on a grinding machine. In terms of the types of rubber used for coating, the commonly used ones include: nitrile rubber, ethylene propylene diene monomer (EPDM) rubber, silicone rubber, neoprene rubber, and polyurethane rubber.

2020-12-13

Introduction to the Surface Treatment Process of Coated Roller Rubber

2020-12

The order of adding materials in the internal mixer and its impact on the mixed rubber.

2020-12-02

2020-11

Manufacturer of blended rubber: Quality issues of blended rubber and their causes

2020-11-24

2020-11

Supplier of compounded rubber: Quality issues of compounded rubber and their causes

2020-11-17

2020-10

Compound rubber supplier: Compound rubber production process

In the production process of rubber compound suppliers, rubber is generally suitable for molding processes, and a small amount can be formulated into general-purpose mixing machines. Large-scale production is carried out on kneaders or closed mixing equipment. The basic process used in formulating silicone rubber in kneaders can improve production efficiency and enhance the working environment. After removing water and other volatiles, silica is added to promote the dispersion of silicone rubber adhesives, followed by the addition of silica and structural control agents for heat treatment at 150 to 1180 for 6 hours; then, further kneading is done in a two-roll mill, and modifiers are added; finally, filtration is performed to remove impurities in the rubber compound.

2020-10-26

Compound rubber supplier: Compound rubber production process

2020-09

Fire safety ensures safety and increases efficiency.

2020-09-04

< 1 2 3 4 5 6 7 >

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

required

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

analyze

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

Feature

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

advertise

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.