News Center_Guangzhou Feiyue New Material_Industrial roller mixingrubber

welcome to visit guangzhou feiyue new material limited company's official website!

Email:66571315@qq.com

Chinese | English

Fly Canton

Home page

NEWS

News

Home page

Supplier of compounded rubber: Factors affecting the compounding process

2022-07-08

During the mixing process, the mixing temperature of natural rubber is generally controlled around 130℃, and the discharge temperature is usually controlled within the range of 130~145℃. If the temperature is too low, it often causes the rubber material to not clump under pressure; if the temperature is too high, it will soften the rubber, which is not conducive to the dispersion of filler quality. Therefore, the rubber mixing suppliers need to pay attention to the control and adjustment of cooling water or heating steam according to the process requirements, in order to control the temperature of the mixing chamber.

Supplier of compounded rubber: A brief introduction to compounded rubber

2022-06-23

The mixing rubber supplied by the supplier is a well-known high-performance rubber, especially known for its excellent resistance to high temperatures, ozone, weather, oxidation, mineral oils, fuel oils, hydraulic oils, aromatics, and many organic solvents and chemicals. The FKM system from the mixing rubber supplier is now available in blends such as normal (66% F), medium F (67-68.5% F), high F (70% F), improved low-temperature elasticity (64.5-67% F), and excellent additional chemical and solvent resistance (66% F).

Key points for using rubber rollers, the film-coated rubber roller manufacturer will clarify for you.

2022-06-09

The manufacturer of coated rubber rollers believes that the internal structure of newly cast rubber rollers is not stable enough. If put into use immediately, it is likely to reduce the service life. Therefore, newly cast rubber rollers should be left for a period of time to allow them to come into contact with the external environment and reach a relatively stable state before being put into use, which can increase the toughness and durability of the rubber.

Key points for selecting and maintaining rubber rollers, the film-coated rubber roller manufacturer will explain for you.

2022-05-25

The manufacturer of the coating roller believes that the roller, as an important stretching component, is closely related to the quality of the yarn in terms of its performance and management level. Manufacturers not only need to pay attention to the manufacturing process and grinding precision, but also the subsequent use, management, and maintenance of the roller are very important to ensure the excellent and stable spinning performance of the roller. Only by complementing each other can a stable level of spinning quality be achieved.

Some knowledge points about rubber rollers, the film-coated rubber roller manufacturer tells you

2022-05-10

The manufacturer of coated rollers believes that with the development of electronic technology and the popularization of rigid rotor balance theory, since the 1950s, most balance equipment for rubber rollers has adopted electronic measurement technology. Rubber rollers using planar circuit technology effectively eliminate the mutual influence of the balance workpiece on both sides.

Some knowledge points about polyurethane blended rubber, explained by the blended rubber manufacturer.

2022-04-25

Polyurethane blended rubber is a type of mixed polyurethane rubber (referred to as MPU) synthesized from polyether polyols and methylene diphenyl diisocyanate (MDI) with an unsaturated structure. The vulcanization system can choose between peroxides or sulfur. The processing technology and vulcanization molding processes and equipment are the same as those for general rubber; it is suitable for manufacturing rubber products with hardness ranging from Shore A 50 to 95.

2022-04

The process and characteristics of compound rubber, as told by the compound rubber manufacturer.

The manufacturer of mixing rubber believes that mixing is the process of using the mechanical force of a rubber internal mixer to evenly disperse various compounding agents in the rubber. The mixing process is to evenly disperse various compounding agents in the rubber, forming a medium of rubber or a mixture of rubber with some compatible components (compounding agents and other polymers) as the medium, and a multiphase colloidal dispersion system with incompatible compounding agents (such as powder fillers, zinc oxide, pigments, etc.) as the dispersed phase.

2022-04-11

The process and characteristics of compound rubber, as told by the compound rubber manufacturer.

2022-04

A one-minute explanation by the rubber compound supplier about what rubber compound is.

The so-called compounded rubber refers to a type of unvulcanized rubber that has fluidity, in which the compounding agents are mixed in block, granule, or powder form. According to compounded rubber suppliers, the rubber material that is mixed with the compounding agents according to the formula using a rubber mixing machine is called compounded rubber. Compounded rubber suppliers indicate that compounded rubber is mainly used for automotive parts, front and rear main shaft oil seals, front and rear crankshaft oil seals, power steering pump seals, transmission pump seals, dust covers, power steering hoses, and 175-degree radiator hoses.

2022-04-02

A one-minute explanation by the rubber compound supplier about what rubber compound is.

2022-03

The UV adhesive manufacturer will introduce the curing time of UV glue and the reasons for whitening.

The UV adhesive manufacturer will introduce the curing time of UV glue and the reasons for whitening. Users should pay attention to taking protective measures to avoid discomfort and allergies caused by operators talking on the phone for long periods. It is recommended to maintain good air circulation in the workplace where UV glue is handled. If cost is not a concern, UV adhesive manufacturers can focus on the selection of raw materials to produce products with relatively low odor; however, it is very difficult to achieve a completely odorless product.

2022-03-24

2022-03

The UV adhesive manufacturer introduces some knowledge about UV glue to everyone.

The UV adhesive manufacturer introduces some knowledge about UV glue. UV glue should not come into direct contact with the skin. If you have a strong allergy resistance, short-term contact with UV glue may not cause adverse reactions. Even so, you do not agree that the operators of UV glue have not taken effective protective measures. It is recommended that those who are in long-term contact with and operate UV glue take some allergy medication under the guidance of a doctor.

2022-03-23

The UV adhesive manufacturer introduces some knowledge about UV glue to everyone.

2022-02

Environmental protection mixing rubber Applications

Eco-friendly blended rubber is quite common in Xinxiang City. The growth of cracks is related to ozone concentration and the mobility of rubber molecular chains. When the ozone concentration is constant, the greater the mobility of the molecular chains, the faster the crack growth. It is believed that the generation and growth of ozone cracking are related to the differences in the physical properties of the thin layer of ozone compounds formed by eco-friendly blended rubber and the physical properties of the surface layer of the original rubber. Now, let's learn about the Applications of eco-friendly blended rubber!

2022-02-24

Environmental protection mixing rubber Applications

2022-02

What is environmentally friendly blended rubber

As far as I know, the environmentally friendly mixing rubber is usually a monomer rubber, made from a mixture of crosslinking agents, catalysts, inhibitors, and pastes. The mixing rubber is generally formed by high-temperature vulcanization after extrusion, and like liquid rubber, it is mainly divided into three types: room temperature vulcanization, low-temperature vulcanization, and high-temperature vulcanization. Regarding the addition of the word "environmental protection" before environmentally friendly mixing rubber, I think it is unnecessary. Because silicone rubber is very environmentally friendly, let's learn together what environmentally friendly mixing rubber is!

2022-02-12

What is environmentally friendly blended rubber

< 1 2 3 4...20 >

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

required

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

analyze

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

Feature

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

advertise

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.